Cooper Menvier 9448 Manual
I have a scantronic 9448 alarm. Power went off one night and alarm would not switch off, key pad unreponsive. Carried out factory reset and although I have manual cant seem to reproramme it properly., basically dont know what I am doing. I live in a bungalow and have 5 pir detectors, one in hall, and kitchen where both exit doors are, one in living room, bedroom and second sitting room. The external alarm and light is not working however when i check them using keypad 4 code they are working. I assume alarm is not properly programmed. Any advice please??
Cooper Menvier 9448 Manual Download
Click to expand.Hi we are assuming it was a power failure as the alarm went off in the middle of the night for no reason. The key pad was unreponsive so we had to turn the power off at the mains to silence it. Did the factory reset but unfortunately we do not have a list of previous default settings just those in manual.
Is there anything else we could try. I am now in the programming mode but cant seem to get it to work properly and also the external alarm does not sound. Anyone know anyone in Tyne and Wear that services/repairs these things. Click to expand.I thought if I did a reset it would default to factory settings and would work fine. Do I just follow the Engineers programme command list, I have tried doing this but when I finished and tried the alarm, the internal alarm sounds continuously after I have exited the property for some reason and there is no external alarm sound.
Totally confused.One pir in hall - exit door, one on back door exit, one in bedroom, living room and final in dining room. I gather this is 5 zones??
Any advice on what I need to programmeI assumed zone 1 and 2 were exit zones so programmed them as zone 1 and 2 entry routes Zone 3 & 5 i programmed as normal alarm but no command on list for 4 so really dont know if I am doing it right??